Using Atrust Device Manager (Adm) Software For Remote Administration - NEC Express5800 Series User Manual

Hide thumbs Also See for Express5800 Series:
Table of Contents

Advertisement

Chapter 6 System Administration
1.
Using Atrust Device Manager (ADM) Software for Remote
Administration
Atrust Device Manager
desktop control through features such as shortcut creation, firmware updates, snapshot capture for mass deployment,
remote shadow, reboot, shutdown, and Wake-on-LAN). By using ADM, you can manage all of your network devices from
one simple-to-use console.
You can download Atrust Device Manager from the following website:
http://www.58support.nec.co.jp/global/download/
If thin clients that have ACS installed are managed and registered on the ADM server, the administrative status becomes
effective and it can not be detected from other ADM servers. This is a security specification to make it inaccessible from a
malicious server. If a thin client is not registered as an ADM server management target, it may be detected from an
unintended malicious server and the setting may be changed. Therefore, make sure that the thin client in the production
environment is registered as managed by the ADM server (detected from the ADM server), or if you do not use the ADM
server, enable stealth mode of ACS.
202

1. Using Atrust Device Manager (ADM) Software for Remote Administration

TM
(ADM) servers provide network management services to thin clients, allowing complete user-
Important Care is required when migrating a thin client in which ACS was configured in the kitting
environment to the production environment. In this case, you need to remove this thin client
information from the kitting environment ADM server. If this operation is not performed, the
production environment ADM server cannot register this thin client.
Note also that in Reset Mode, not only the ACS managed status, but also all ACS settings are
initialized. For details about the Reset Mode, see Chapter 6, "2.2 Restoring Atrust Client Setup
Settings"
Note with care that the production environment ADM server executes "Pull Settings" after
detecting the thin client. As a result, the thin client ACS settings are synchronized to the ADM
server and overwrite the settings on the ADM server side.
 The registration information in Thin Client is not removed when the thin client is removed by
Note
ADM in the condition that thin client is disconnected from network. In this case you need to
execute Reset Mode at Thin Client.
 Even if Reset Mode is executed at the Thin Client, registration information on ADM side isn't
updated. Administrators need to remove the Thin Client at ADM side.
Express5800/US320f User's Guide

Advertisement

Table of Contents
loading

This manual is also suitable for:

Us320f

Table of Contents