NEC Express5800 Series User Manual page 189

Chapter 5 Administrative Utilities and Settings
15. Click the OK button to close the advanced dialog.
16. Click the OK button to close the wireless network properties dialog.
17. Click the Close button to close the Wi-Fi dialog.
18. Confirm that the wireless LAN icon in the task bar notification area at the bottom right of the screen is in the
connection status.
19. Restart US320f.
20. After the automatic sign-in with the User account, confirm that the wireless LAN icon in the task bar notification
area at the lower right of the screen is in the connection status.
EAP-TLS
When using EAP-TLS, it is necessary to install the root certificate in US320f, and install client certificate at the same time.
1. Start US320f.
2. Automatically sign in with the User account.
3. Connect the USB wireless LAN adapter to the USB port of US320f.
4. Click the wireless LAN icon in the task bar notification area at the bottom right of the screen.
Note Since EAP-TLS defined in IEEE defines the use of client certificate and either computer certificate or
user certificate is not specified, it is also possible to use a user certificate instead of a computer
certificate for EAP-TLS authentication. However, it is important to note that if you use a user
certificate, you can not establish a wireless LAN connection before signing in and after signing out
Express5800/US320f User's Guide
13. Wireless LAN Settings
189