Table of Contents
Advertisement
In this chapter, you will learn a variety of copying operations.
NORMAL COPYING
Make sure that you have completed the initial setup of the unit, and that
the power is on.
If the power cord is plugged into a power source and the unit is still off, press the "POWER"
button (
appear on the display panel, and the unit will be enabled.
Place the original.
Refer to "ORIGINAL PLACEMENT". (See page 44)
Making selections for copying.
If no changes are made in this step, copies will be made using the currently set system defaults.
(See page 54)
To change the original type setting, refer to "How to set the original type". (See page 45)
To change the paper type setting, refer to "How to set the paper type". (See page 46)
To change the paper size setting, refer to "How to set the paper size". (See page 47)
To set the copy quantity, refer to "How to set the copy quantity". (See page 47)
To select colour or black/white copy, refer to "How to select colour or black/white copy".
(See page 48)
To select the copy quality, refer to "How to select the copy quality". (See page 48)
To change the zoom setting, refer to "REDUCING/ENLAGING THE IMAGE SIZE FOR
COPYING". (See page 49)
To change the brightness setting, refer to "Setting brightness". (See page 52)
To change the intensity setting, refer to "Setting intensity (Colour copy mode only)".
(See page 52)
Press the START button (
Downloaded from:
http://www.usersmanualguide.com/
MAKING COPIES
) to turn on the unit. When the unit is turned on, the following messages and values will
) to start copying.
When using the bypass tray for copying, insert only one sheet of paper at a time
and then press the "START" button (
unit, and press the "START" button (
make multiple copies using the bypass tray. When using card stock type paper
or thick paper for copying, set the paper knob to (
Load the paper whose size corresponds to the size you select for the "Paper
Size". If you set different size of the paper into the tray, you may fail to print or
copy successfully.
Warming up...
100%
A4
0
Ready to Copy
100%
A4
0
). The paper will be fed slightly into the
), then copying will start. You cannot
). (See page 25)
43
Advertisement
Table of Contents
