Basic Procedure For Making Copies; Making Copies; Using The Automatic Document Feeder To Make Copies - Sharp MX-2301N Operation Manual

BASIC PROCEDURE FOR MAKING
COPIES
This section explains the basic procedures for making copies, including selection of the copy ratio and other copy
settings.

MAKING COPIES

USING THE AUTOMATIC DOCUMENT FEEDER TO
MAKE COPIES
This section explains how to make copies (1-sided copies of 1-sided originals) using the automatic document feeder.
Indicator
line
1
Ready to scan for copy.
Full Colour
Colour Mode
Job Detail
Settings
Auto
Exposure
100%
Copy Ratio
2
Depending on the size of the placed original, there may be cases where the same size of paper as the original is not
selected automatically. In this event, change the paper size manually.
Downloaded From ManualsPrinter.com Manuals
0
2-Sided Copy
Original A4
Output
Plain
A4
Special Modes
A4
1.
A4R File
2.
B4
3.
A3
Quick File
4.
(A)
2-12
Place the originals face up in the
document feeder tray with the edges
aligned evenly.
Insert the originals all the way into the document feeder tray.
Multiple originals can be placed in the document feeder tray.
The stack of originals must not be higher than the indicator line
on the tray.
Check the paper to be used and the
colour mode.
Make sure that the desired paper (tray) and colour mode are
selected.
• To change the paper (tray), touch the [Job Detail Settings]
key and then the [Paper Select] key, or touch the paper size
display (A).
☞
PAPER TRAYS (page 2-11)
• To change the colour mode, touch the [Colour Mode] key.
☞
COPY COLOUR MODES
COPIER
(page 2-21)
Contents