Getting Started; Switching On And Setting Up - Pioneer XV-DVR9H Operating Instructions Manual

03

Getting started

Chapter 3
Getting started

Switching on and setting up

Before switching on for the first time, make sure that
everything is connected properly and the system is
plugged into a power outlet. See the Setup Guide for
information on connecting up your system.
When you switch the system on for the first time, you can
make several basic settings using the Setup Navigator
feature. This takes you through setting the clock, the
internal TV tuner and the video and audio output settings.
If you're using the system for the first time, we strongly
recommend you use the Setup Navigator before starting
to use the system.
18
En
STANDBY/ON
TUNE +
ST – ST +
ENTER
RETURN
TUNE –
1 Switch on your TV and set the video input to this
system.
2 Press the STANDBY/ON button on the remote
control or the front panel to switch on.
When you switch on for the first time, your TV should
display the Setup Navigator screen. (If the Setup
Navigator doesn't appear, you can also access it from the
Initial Setup menu; see page 103).
• If this system is connected to a compatible TV using
a fully-wired 21-pin SCART cable, the system will take
a few seconds to download country, TV screen size
and language information. (Check the manual that
came with your TV for compatibility information.)
3 Use the (cursor up/down) buttons to choose
a language, then press ENTER.
Initial Setup
Language
Basic Clock Set
Tuner Input Line System
Video In/Out On Screen Display
Audio In Front Panel Display
Audio Out Power Save
Language Setup Navigator Setup Navigator
Recording
Playback
4 Press ENTER to start setting up using the Setup
Navigator.
Initial Setup
Basic Clock Set
Complete this setup before you
Tuner Input Line System
start using your recorder.
Video In/Out
On Screen Display
Audio In
Front Panel Display
Audio Out
Power Save
Language Setup Navigator Setup Navigator
Please use the Initial Setup if you
Recording
want to make more detailed settings.
Playback
• If you don't want to use the Setup Navigator, press
(cursor down) to select Cancel, then press ENTER to
exit the Setup Navigator.
5 Select the Auto Channel Setting ('Auto Scan' or
'Download from TV'), or 'Do not set', then press
ENTER.
Initial Setup
Auto Channel Setting
Basic Clock Set
Tuner Input Line System
Video In/Out On Screen Display
Audio In
Front Panel Display
Audio Out
Power Save
Language
Setup Navigator Setup Navigator
Recording
Playback
English
français
Deutsch
Italiano
Español
Start
Cancel
Auto Scan
Download from TV
Do not set