Accessories; Tools - ABB RELION 630 Series Product Manual

Power Management
PML630/Compact Load-Shedding Solution
Product version: 1.2.1

26. Accessories

Table 37. Mounting accessories
Item
Flush mounting kit for one 4U half 19" housing device
Semi-flush mounting kit for one 4U half 19" housing device
Wall-mounting kit (cabling towards the mounting wall) for one 4U half 19"
housing device
Wall-mounting kit (cabling to the front) for one 4U half 19" housing device
19" rack mounting kit for one 4U half 19" housing device
19" rack mounting kit for two 4U half 19" housing devices
Table 38. Connector sets
Item
Connector set for one 4U half 19" housing device including analog input
variant 4I + 5U (Io 1/5A), 5I + 4U (Io 0.1/0.5A) or 4I + 5U (Io 0.1/0.5A)
Connector set for one 4U housing device including analog input variant 8I
+ 2U
Table 39. Optional cables
Item
LHMI cable (5m)

27. Tools

PML630 is delivered without factory-made pre-configuration.
The default parameter setting values can be changed from the
front panel user interface, the web browser-based user
interface (WebHMI) or the PCM600 tool in combination with the
device-specific connectivity package.
PCM600 offers extensive device configuration functions such
as application configuration, parametrization, signal
configuration and IEC 61850 GOOSE communication
configuration.
When the web browser-based user interface is used, the device
can be accessed either locally or remotely with a web browser
(IE 7.0 or later). For security reasons, the web browser-based
user interface is disabled by default. The interface can be
enabled with the PCM600 tool or from the front panel user
interface. The functionality of the interface is by default limited
to read-only, but can be configured to enable reading and
writing access by means of PCM600 or the local HMI.
The device connectivity package is a collection of software and
specific device information which enables system products and
tools to connect and interact with the device. The connectivity
packages reduce the risk of errors in the system integration,
minimizing device configuration and setup times.
40
Order number
1KHL400040R0001
1KHL400444R0001
1KHL400067R0001
1KHL400449R0001
1KHL400236R0001
1KHL400237R0001
Order number
2RCA021735
2RCA023039
Order number
2RCA025073P0005
The configurability of the device ensures the easy adaptation of
load-shedding functionality to any applicable industrial power
network, thus adapting to the specific requirements in the
project. An efficient and low-effort engineering procedure
ensures automatic completion of certain engineering steps.
• Instantiation of function blocks and their interconnections
to complete the load-shedding application logic
• Instantiation of additional logic for the LHMI events
engineering, function key assignment, LED assignment,
test mode handling and the disturbance record
configuration for Configuration A
• Instantiation of additional logic for the LHMI LED
assignment and the events engineering for Configuration
B
• Generation of the load-shedding single-line diagram with
user-configured busbar names for the local HMI
• IEC 61850 engineering and the GOOSE signal mapping,
specific to the device
• Load-shedding display configuration for COM600 when
used as an HMI
• Feeder device report (Excel) with details such as location
in PCM600 substation tree structure, device type,
configuration version, device technical key, order/
1MRS757334 E
ABB