Range The range
Refresh Page Period
entered here (in seconds).
8.3
SYSTEM ADMINISTRATION PAGES
The following menu options are available for the system administrator and can be password
protected. Figure 26 shows the system administration login page. By default a system admin
password is not set. Simply click the login button to access the system administration features.
Once the password has been set using the 'Change Password' menu item the system
administration pages will only be available after the user has entered the correct password.
The features that are only available to the system administrator are:
•
Configuration
•
Statistics
•
The Installation Wizard
•
Software Upgrade
•
Spectrum Management including DFS
•
Remote management
•
Downloadable Diagnostics
•
Password Management
•
License Key Management
•
Properties
•
System Reboot
8.3.1
System Configuration Page
The configuration page (Figure 27) is used by the system administrator to configure the 30/60
Mbps Backhaul unit.
6
The 30/60 Mbps Backhaul displays range in km by default, if the user would prefer to display
range using Miles the 'Distance Units' attribute should be set to imperial, see the "Properties"
webpage section 8.3.19
7
This option is only available to the System Administrator
Issue 3.1, July 2006
6
between the peer 30/60 Mbps Backhaul units.
7
- The Status page refreshes automatically according to the setting
Figure 26: System Administration Login Page
Page 56 of 162