Mount The Device To A Din Rail; Expansion Module Installation - Dell EMC Edge 3200 User Manual

Mount the device to a DIN rail

Steps
1. Attach the DIN rail kit (offered separately) with screws from the package, using the four screw holes circled in red in the
following figure.
Figure 34. DIN rail kit screw hole locations
2. Use the spring-operated DIN rail kit to clip the device onto the DIN rail.
Figure 35. DIN rail kit installed

Expansion module installation

The EGW-3200 offers versatile expansion modules for a wide range of solutions, including 2x isolated COM RS-422/485, 2x
isolated COM RS-232, 2x isolated GbE with PoE out, 2x isolated GbE LAN, 2x isolated Canbus, 8x isolated DI/O, 4G, and 5G
modules. For information about safety and proper installation, go to the EGW-3200 page of the Dell Technologies Support Site.
Getting Started 29