WARNING:
Before setting up your system, follow the safety instructions included in the Safety, Environmental,
and Regulatory Information document that is shipped with the system.
Topics:
•
Attach the WiFi antennas
•
Attach DC power connector
•
Power on and start up the operating system
•
Mount the device
•
Expansion module installation
Attach the WiFi antennas
Steps
1. Locate the antennas that are included in the Accessory Box, and find the antenna connections on the back panel of the
device, as shown in the following figure.
Figure 26. Antenna connections ANT1 and ANT2
2. Attach one antenna to the ANT1 for WiFi.
3. Attach the other antenna to the ANT2 for WiFi and Bluetooth.
Results
Figure 27. Antennas attached
Getting Started
Getting Started
4
25