AEG 40809 User Instructions page 29

Table of Contents

Advertisement

Symptoms
The machine will not start
The machine will not spin
The machine will not drain
The machine vibrates and is very noisy
Solutions
Check that:
- fuses are in good condition,
- the washing machine is properly connected,
- your washing machine cover is properly closed,
- you have actually selected the program that
you want,
- the program start has actually been pushed in
(On/Off - button pressed in),
- there is no power supply failure,
- the water tap is fully open,
- the water inlet filter is not blocked.
Check that:
- the drain pipe is not blocked or folded,
- the drain pump filter is not blocked,
- the washing load is properly distributed in
the drum,
- the Drain program has not been selected and
the RINSE HOLD button has not been pressed.
Check that:
- the drain pipe is not blocked or folded,
- the drain pump filter is not blocked,
Check that:
- all transport packing has been removed,
- the washing machine is level and properly
supported,
- the washing machine is not too close to the
wall or furniture,
- the washing is well distributed in the drum,
- the load is sufficient.
Notice d'utilisation
29

Advertisement

Table of Contents
loading

Table of Contents