Advertisement
Quick Links
Advertisement
Related Manuals for 3DUpFitters BlazeCut Fire Extinguisher
Summary of Contents for 3DUpFitters BlazeCut Fire Extinguisher
- Page 1 BlazeCut Fire Extinguisher Installation Manual 2.0 June, 2022 Copyright 2022 3D UPfitters LLC...
- Page 2 This page left blank for no good reason whatsoever. Copyright 2022 3D UPfitters LLC...
- Page 3 Short Blazecut Installation If your BlazeÇut isn’t as wide as the 3D printer enclosure, then installation is pretty easy: Enclosures from 3D UPfitters come with the holes predrilled in the top in the optimal position. Simply use the included connectors we’ve designed for this purpose and use the M4 screws and nuts to attach the BlazeCut to the underside of the top.
- Page 4 Long Blazecut Installation (T100E) If the BlazeCut is much wider than the enclosure If your enclosure doesn't have a support bar, the easiest thing to do is use the zip tie attachment points on the 3D UPfitters connectors as shown below: The included connector pieces can also be used to attach the BlazeCut on the sides.
- Page 5 Support Beam If your enclosure has a support beam or isn't flat on the top you'll can either let the tube hang below the support beam, OR use this handy modification to float the tube just below the support beam. Visit the product page for the BlazeCut for a link to the STL so you can print it yourself.