Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AEG FSE93000RO
Summary of Contents for AEG FSE93000RO
- Page 1 FSE93000RO User Manual Dishwasher USER MANUAL...
-
Page 2: Table Of Contents
Products must be used, installed and operated in accordance with this manual. You may not be able to claim on the AEG manufacturer’s warranty in the event that your product fault is due to failure to adhere to this manual. -
Page 3: Safety Information
ENGLISH Environmental information Subject to change without notice. SAFETY INFORMATION Before the installation and use of the appliance, carefully read the supplied instructions. The manufacturer is not responsible for any injuries or damage that are the result of incorrect installation or usage. Always keep the instructions in a safe and accessible location for future reference. -
Page 4: Safety Instructions
– and other working environments; by clients in hotels, motels, bed & breakfast and – other residential type environments. Do not change the specification of this appliance. • The operating water pressure (minimum and •... - Page 5 0 °C. • Install the appliance in a safe and suitable place that meets installation requirements. www.youtube.com/electrolux www.youtube.com/aeg How to install your 60 cm Dishwasher Sliding Hinge 2.2 Electrical connection WARNING! Dangerous voltage. WARNING! •...
-
Page 6: Product Description
• This appliance has an internal lamp conditions in household appliances, that comes on when you open the such as temperature, vibration, door and goes off when the door is humidity, or are intended to signal closed. information about the operational •... -
Page 7: Control Panel
ENGLISH Cutlery drawer 3.1 Internal light The lamp goes off when you close the door or switch the appliance off. The appliance has an internal lamp. It Otherwise, it goes off automatically after comes on when you open the door or some time to save energy. -
Page 8: Programme Selection
Indicator Description Machine Care indicator. It is on when the appliance needs internal clean‐ ing with the Machine Care programme. Refer to "Care and cleaning". Drying phase indicator. It is on when a programme with the drying phase is selected. It flashes when the drying phase operates. Refer to "Pro‐... - Page 9 ENGLISH 5.4 Programmes overview Programme Dishwasher Degree of soil Programme phases EXTRAS load Quick Crockery, Fresh • Dishwashing 50 °C • ExtraPower cutlery • Intermediate rinse • GlassCare • Final rinse 50 °C • AirDry Crockery, Fresh, lightly • Dishwashing 60 °C •...
-
Page 10: Basic Settings
Consumption values Water (l) Energy (kWh) Duration (min) 1) 2) Programme Quick 10.4 0.61 12.6 0.92 1h 30min 13.1 1.07 2h 40min 12.5 1.13 11.2 0.742 AUTO Sense 12.5 1.15 Machine Care 11.4 0.87 1) The pressure and the temperature of the water, the variations of the mains supply, the options, the quantity of dishes and the degree of soil can change the values. - Page 11 ENGLISH Settings Values Description Display on floor On (default) Activate or deactivate the TimeBeam. 1) For more details, refer to the information provided in this chapter. How to enter setting mode You can change the basic settings in setting mode. You can enter setting mode before When the appliance is in setting mode, starting a programme.
- Page 12 CAUTION! rinse phase. It is possible to set the Do not try to close the released quantity of rinse aid. appliance door within 2 When rinse aid chamber is empty, the minutes after automatic rinse aid indicator is on notifying to refill opening.
-
Page 13: Before First Use
ENGLISH • DELAY and the countdown duration When AirDry opens the when the delay start begins. door, TimeBeam is off. To • An alarm code when the appliance check the remaining time of has a malfunction. the running programme, look at the control panel display. - Page 14 • If there is a full load of plates, CAUTION! slightly push the basket down. Make sure that items do not • If the basket is empty or half- stick out of the basket frame loaded, press the basket down.
- Page 15 ENGLISH 8.3 How to select and start a 8.5 How to start the AUTO programme using MY TIME Sense program selection bar 1. Press 1. Slide your finger across MY TIME • The light related to the button is selection bar to choose a suitable programme.
-
Page 16: Hints And Tips
8.10 The Auto Off function Make sure that there is detergent in the detergent This function saves energy by switching dispenser before you start a the appliance off when it is not operating. new programme. The function comes into operation automatically: 8.9 Opening the door while... -
Page 17: Care And Cleaning
ENGLISH • Put light items in the upper basket. • The programme is applicable to the Make sure that the items do not move type of load and for the degree of soil. freely. • The correct quantity of detergent is •... - Page 18 10.2 Internal cleaning • Clean the appliance interior with a soft damp cloth. • Do not use abrasive products, abrasive cleaning pads, sharp tools, strong chemicals, scourer or solvents. • Wipe clean the door, including the rubber gasket, once a week.
- Page 19 ENGLISH 8. Put back the filter (B) in the flat filter (A). Turn it clockwise until it locks. 3. To install the spray arm back, press it downwards. CAUTION! An incorrect position of the filters can cause bad washing results and damage to the appliance.
- Page 20 1. Move the upper basket to the lowest level to reach the spray arm more easily. 2. Pull out the cutlery drawer to the 4. To install the spray arm back, press maximum.
-
Page 21: Troubleshooting
ENGLISH 11. TROUBLESHOOTING to contact an Authorised Service WARNING! Centre. Improper repair of the Refer to the below table for information appliance may pose a on possible problems. danger to the safety of the user. Any repairs must be With some problems, the display shows performed by qualified an alarm code. - Page 22 Problem and alarm code Possible cause and solution The remaining time in the • This is not a defect. The appliance is working correctly. display increases and skips nearly to the end of the pro‐ gramme duration. Small leak from the appli‐...
- Page 23 ENGLISH 11.2 The dishwashing and drying results are not satisfactory Problem Possible cause and solution Poor washing results. • Refer to "Daily use", "Hints and tips" and the basket loading leaflet. • Use more intensive washing programme. • Activate the ExtraPower option to improve the washing results of a selected programme.
-
Page 24: Technical Information
Problem Possible cause and solution Odours inside the appliance. • Refer to "Internal cleaning". • Start the Machine Care programme with a descaler or a cleaning product designed for dishwashers. Limescale deposits on the ta‐ • Start the Machine Care programme with a descaler bleware, on the tub and on the designed for dishwashers. -
Page 25: Installation
ENGLISH 13. INSTALLATION Remove entire plastic There should be a minimum The hose should not be membrane from sink trap 2mm gap between the top of extended by more than spigot & fit drain hose to spigot the dishwasher and 2 metres or water pump- with clamp underside of bench top... -
Page 26: Warranty
This document sets out the terms and addition to other rights you may have conditions of the product warranties under the Australian Consumer Law. for AEG Appliances. It is an important 1. In this warranty: document. Please keep it with your... - Page 27 ‘ASC’ means Electrolux’s the property of Electrolux. authorised serviced centres; 5. Travel and transportation costs: d) ‘AEG’ is the brand controlled by Subject to clause 7, Electrolux will Electrolux Home Products Pty bear the reasonable cost of Ltd of 163 O’Riordan Street,...
- Page 28 – the Appliance has been, or under the Australian Consumer Law. Electrolux reasonably You are entitled to a replacement or believes that the Appliance refund for a major failure and for has been, used for purposes compensation for any other...
-
Page 29: Environmental Concerns
ENGLISH FOR SERVICE FOR SPARE PARTS or to find the address of your nearest au‐ or to find the address of your nearest spare thorised service centre in New Zealand parts centre in New Zealand PLEASE CALL 0800 234 234 PLEASE CALL 0800 10 66 20 OR EMAIL OR EMAIL... - Page 32 www.aeg.com/au...