High-Speed Search; Skip Search; Index Search - JVC HR-J456EN Instruction Manual

1 2
4 5
7 8
0
1
REW
3
2
6
9
4

SKIP SEARCH

FF
PUSH JOG

High-Speed Search

ACTIVATE HIGH-SPEED
SEARCH
1
During playback or still, press FF for forward high-
speed search, or REW for reverse high-speed search.
To resume normal playback, press PLAY.
NOTE:
For short searches, during playback or still, press and hold FF or
REW for over 2 seconds. When released, normal playback
resumes.
Skip Search
SKIP OVER UNWANTED
SECTIONS
1
Press SKIP SEARCH once to four times during playback.
Each press initiates a 30-second period of fast motion
playback. Normal playback resumes automatically.
NOTE:
To return to normal playback during a Skip Search,
press PLAY.

Index Search

Index codes are placed on the tape at the start of each
recording. You can find and automatically play back from the
start of any recording using the Index Search function.
START SEARCH
1
While the tape is stopped, press PUSH JOG ™ or
£.
ACCESS DISTANT CODE
2
To access a recording 2–9 index codes away, press
PUSH JOG ™ or £ repeatedly until the correct
number is displayed on screen (only if SUPERIMPOSE is
set to ON ( pg. 20). Playback begins automatically
when the desired recording is located.
If necessary press REW or FF when play starts to
search visually to find the very beginning of the
desired program.
NOTE:
An index code is not placed on the tape when recording is
paused and then resumed.
17
EN