Tuner; Set Receivable Channels - JVC HR-J456EN Instruction Manual

12
EN

Tuner

Turn on the TV and select the VCR channel 3 or 4 (or AV
mode).
1
4
7
1
MENU
INFORMATION
The VCR detects the band (TV or CATV) and selects the
correct band automatically during Auto Channel Set.
The selected band will be displayed on the right side of
"BAND" on the Tuner Set screen.
POWER
2 3
2
5 6
8 9
0
4
CH+/–
OK
PUSH JOG
INITIAL SETTINGS (cont.)

Set Receivable Channels

TURN ON THE VCR
1
Press POWER.
ACCESS MAIN MENU
SCREEN
2
Press MENU.
ACCESS TUNER SET
SCREEN
3
Move the highlight bar
(arrow) to "TUNER SET"
by pressing CH 5 ∞ (+/–)
or PUSH JOG % fi, then
press OK or PUSH JOG # .
PERFORM AUTO CHANNEL
SET
4
Move the highlight bar
(arrow) to "AUTO
CHANNEL SET" by
pressing CH 5 ∞ (+/–) or
PUSH JOG % fi , then press
OK or PUSH JOG #.
Receivable channels in
your area are
automatically assigned to
the CH 5 ∞ (+/–) buttons,
and non-receivable
channels are skipped.
NOTES:
At the end of Auto
Channel Set, "SCAN
COMPLETED" appears
on screen.
If the scan was unsuccessful, "SCAN COMPLETED–
NO SIGNAL–" appears on screen. Check the
connections and start again.
RETURN TO NORMAL
SCREEN
5
Press MENU.
NOTE:
If the VCR's memory backup expires because of a power
failure, set receivable channels again.
MAIN MENU
FUNCTION SET
= TUNER SET
INITIAL SET
PRESS (5,∞), THEN (OK)
PRESS (MENU) TO END
TUNER SET
BAND TV
=AUTO CHANNEL SET
MANUAL CHANNEL SET
SELECT WITH (5,∞) AND (OK)
PRESS (MENU) TO END
AUTO CHANNEL SET
SCANNING...
PRESS (MENU) TO END