Table of Contents
Advertisement
Quick Links
Others
SPECIFICATIONS
CAMERA
Signal system:
U type based on NTSC standard
E type based on PAL standard
Image device: 1/4" IT CCD
Effective picture elements:
U type
380,000 pixels,
768 (H) × 494 (V)
E type
440,000 pixels,
752 (H) × 582 (V)
Sync system: Line lock/Internal
Video S/N:
50 dB (AGC OFF, Typ.)
Horizontal resolution:
535 TV lines (Typ.)
Minimum illumination:
4.8 l× (F1.2, AGC ON,
50%, WIDE end) (Typ.)
2.4 l× (F1.2, AGC ON,
25%)
0.9 l× (F1.2, AGC ON,
25%, with clear dome
cover (option))
White balance: ATW/Manual (switchable)
ATW:
Color temperature range
2300K to 10000K.
Backlight compensation:
ON/OFF (Switchable)
LENS
Focal length: 2.6 mm to 6 mm (variable)
Max. aperture ratio:
F1.2 to F1.8
Angle of vision:
f = 2.6 mm
82° (H) × 59° (V)
f = 6 mm
35° (H) × 26° (V)
Angle adjustment range:
Horizontal: 120°
Vertical: +80°, –50°
Tilt: ±15°
E-16
GENERAL
Power requirement:
AC 24 V
50/60 Hz or
DC 12 V
Power consumption:
U type
Approx. 4.2 W
E type
Approx. 300 mA
Mass:
570
Operating temperature:
–10°C to 50°C (recom-
mended: 0°C to 40°C)
Dimensions:
Approx. 156 mm diam-
eter × 89 mm
Accessories:
U type
E type
• Instructions × 1
• Instructions × 2
• Warranty card × 1
• Service information
card × 1
External dimensions
[Unit: inches (mm)]
φ6-3/16(156)
φ4-3/32 (103.5)
• Design and specifications are subject to
change without notice.
DOME CAMERA
CAMÉRA À DÔME
CÁMARA DOMO
TK-C205
For Customer Use:
Enter below the Serial No. which is
located on the body. Retain this
information for future reference.
Model No.
TK-C205
Serial No.
INSTRUCTIONS
MODE D'EMPLOI
INSTRUCCIONES
LWT0123
Advertisement
Table of Contents
Related Manuals for JVC TK-C205E
Summary of Contents for JVC TK-C205E
- Page 1 Others SPECIFICATIONS GENERAL CAMERA Power requirement: Signal system: U type based on NTSC standard E type based on PAL standard Power consumption: Image device: 1/4” IT CCD Effective picture elements: U type 380,000 pixels, 768 (H) × 494 (V) Mass: Operating temperature: E type 440,000 pixels,...
- Page 2 IMPORTANT SAFEGUARDS 1. Read all of these instructions. 2. Save these instructions for later use. 3. All warnings on the product and in the operating instructions should be adhered to. 4. Unplug this appliance system from the wall outlet before cleaning. Do not use liquid clean- ers or aerosol cleaners.
-
Page 3: Table Of Contents
Cet appareil numérique de la Class B est This device complies with part 15 of the FCC Rules. conforme á la norme NMB-003 du Canada. Changes or modifications not approved by JVC could void the user’s authority to operate the equipment. Thank you for purchasing this product. -
Page 4: Features
Features Operating Precautions ● To save energy, when it is not being used The camera uses a high-resolution turn the system’s power off. 380,000 pixel (U type) / 440,000 pixel (E ● This camera has been designed for indoor type), high-sensitivity CCD to realize high use. -
Page 5: Names And Operations Of Parts Camera Body
Names and Operations of Parts Camera Body Body Surface View when the dome cover is removed. FOCUS ADJ. ON-AGC ON-BLC AUTO MANU PHASE WHT.BAL. SPOT RESET CORRECTION SERVICE IRIS LEVEL MONITOR Camera Head When turning the level (sensitivity • adjustment) too far to the L side, the For adjusting the angle of the camera, sensitivity will increase by the AGC such as during focusing, etc. -
Page 6: Body Underside
Names and Operations of Parts Camera Body (continued) Body Underside LW40459-001A TYPE) ONLY POWER ISOLATED TYPE) ONLY CLASS WIRE BLACK WIRE AC24V DC12V VIDEO Cable MANUAL INSTRUCTION Power input cable Mounting holes To input DC 12 V or AC 24 V power. These holes are used to mount the camera body to the ceiling. -
Page 7: About Connection Cables
Installation and connection About Connection Cables • Turn OFF the power supply to all components before making connections. Video signal cables Connect the coaxial cables (BNC) to the video signal output connector (BNC). Note Use the 3C-2V or 5C-2V video signal cable (coaxial cable). -
Page 8: Connection For Adjustment Of The Camera
Installation and connection Mounting the Camera to the Ceiling (Continued) Roll cables with insulation tape. Power supply As shown in the diagram to the left, roll cable the entire connecting section of the Roll with tape BNC connector power supply cable and BNC connec- tor with insulation tape and insert them in the electrical box. -
Page 9: Others
Installation and connection Adjusting the Camera Angle (Continued) Attach the dome cover. Set the dome cover to the unit by aligning the 3 marks on the camera and dome cover (I, II and III). Be sure that the dome cover is firmly at- tached. - Page 10 Focus chart...