Philips HTS5540 Service Manual page 8

System , Region Code , etc. Setting Produre
1)Restore factory setting
a) Press <SETUP> button on R/C
b) Select <preference setup> ,then press < OK >
c) Select <default>,then press <OK> to con rm
2)Version control change
a) Open the Door,then,press "1" "5" "9" on RC
b) Press <OK> button on RC
c) TV will show message as follow:
Current model: 5540-12
Version:00.08.00_0 Release:2009.12.22
Region: 2 Servo:AE.57.F1.00
8032: 05.00.04.06 Risc: AA.00.00.00
MCU: 07.00 Touch: 0009
TX: Error RX: Error
if current model does not match you set,
use down arrow key on the remote to change
OK
3)Password change
a) Press <SETUP> button on R/C
b) Select <preference setup> ,then press <OK>
c) Select <password> <change>,then press <OK> to con rm
"0000" is default password supplied.
4)Trade model
a) Press <Open/Close>button on R/C
b) Press "2" "5" "9" on R/C,VFD will display "TRA ON " or "TRA
OFF"
5)Check on software version
a) Press <SETUP> button on R/C
b) Select <preference setup> ,then press <OK>
c) Select <version info>,then press <OK>
d) TV will show message as follow:
Preference setup
Version Info.
Current model: 5540-12
Version :00.08.00_0 Release: 2009.12.22
Region: 2 Servo: AE .57.F1.00
8032:05.00.04.06 Resc: AA.00.00.00
MCU: 07.00 Touch: 0009
TX: Error RX: Error
OK
Press SETUP to exit menu
2 - 1
6) Upgrading new software
a) Copy the latest upgrading software onto a CD-R or USB storage
device
b) Insert the CD-R program disc or connect the USB storage device
to the home theater
c) TV will show message as follow
Upgrade fi le detected
Do you wish to continue with
the software upgrade?
OK Cancel
d) Select <OK>,the home theater will start to upgrading
automatically
Note: when upgrade in progress, please do not unplug or switch off
the device.
when the updated is complete ,the home theater automatically
switch to standby.
CAUTION!
This information is confi dential and may not be
distributed.Only a qualifi ed service person should
reprogram the Region Code.
2 - 1