Bottom Drawer Panels; Back Drawer Panels - Grizzly T10157 Instructions Manual

Assembly
Items Needed
Wood Glue......................................... As Needed
90° Square ........................................................ 1
Phillips Screwdriver #2 ...................................... 1
Another Person .................................................. 1
Wrench or Socket ⁄ " ........................................ 1
1
2
Open-End Wrench 22mm .................................. 1
To assemble workbench:
1. Insert (4) wood dowels in front drawer panel,
as shown in Figure 3.
Tip: Use wood glue when installing wood
dowels for extra stability.
2.
Press right drawer panel onto wood dowels to
attach it to front drawer panel (see Figure 3).
Right
Drawer Panel
x 4
Figure 3. Attaching right and front door panels.
Note: Orient sides of drawers so tapered end
of drawer slides (see Figure 4) are facing
back of drawer.
Tapered End
Figure 4. Tapered end of drawer slide (right
drawer panel shown).
-4-
Qty
Front
Drawer Panel
3.
Slide bottom drawer panel into right and front
panel dadoes (see Figure 5).
Bottom
Drawer Panel
Figure 5. Drawer panel bottom inserted into
dadoes.
4.
Install (2) wood dowels in rear holes of right
drawer panel, then press back drawer panel
onto wood dowels (see Figure 6).
x 2
Back Drawer Panel
Figure 6. Installing back drawer panel.
5.
Install (2) wood dowels in holes of back
drawer panel.
Model T10157 (Mfd. Since 07/19)