Data Box Radio - Motorola MTM800 Installation Manual

INSTALLATION

Data Box Radio

This configuration allows the controlling of the radio (Transceiver Box) via PEI (for example:
Personal Computer, Laptop, Console, and so forth) with AT Commands (recommended) or TNP1
protocol from a Control Terminal.
In this configuration, the Data Terminal is a substitute for the Enhanced Control Head. The Data
Terminal is connected to either the 9-pin socket of the Data Expansion Head Enhanced via the
RS232 cable or to the 20-pin accessory connector via the active data cable (see section
"Connecting Cables" on page 69 for more information).
TELCO
Connector
(10-Pin)
25-Pin subD
Connector
(female)
9-Pin subD
Connector
(female)
DB9-DB9
RS232
Cable
MTM800 Enhanced Mobile Terminal Installation Manual
Top view to the chassis
MTM800 Enhanced
Data
OR
Terminal Terminal
Figure 22 Data Box Radio Configuration
Transceiver
Box
Active Data Cable
GMKN1022
Data
Accessory
Connector (20-Pin)
Power Connector
BNC Antenna
Connector
51