Volume Screens - ZyXEL Communications NAS326-2T User Manual

Change RAID Type
You can change the following RAID types without losing stored data. This can help you manage your
storage capacity as you add more disks.
Table 11 Internal Volumes
RAID TYPE
Basic
RAID 1
RAID 5
Expand Volumes or Disk Groups
As your content grows, you can do the following to expand the storage capacity of a volume or disk
group without losing stored data.
Table 12 Expand Volumes and Disk Groups
EXPANSION
METHOD
Using
unallocated disk
space
Adding disks
Replacing with
larger disks

5.3.1 Volume Screens

Use the Volume screen to configure and manage internal volumes. From the Internal Storage screen,
click Volume to open the screen as shown.
Chapter 5 Storage Manager
WHAT YOU CAN CHANGE IT TO
RAID 1
RAID 1 with a hot spare or RAID 5
RAID 5 with a hot spare or RAID 6
DESCRIPTION
You can add more storage space to a volume if there is still some space unallocated on the
same disk group.
You can add one or more disks to a JBOD, RAID 1 or RAID 5.
The hard disk you want to add must have capacity equal to or greater than the smallest disk in
the volume or disk group.
You can replace smaller disks in a RAID 1, RAID 5, or RAID 6 with larger disks.
Replace disks one-by-one.
Replace the smallest disk in the volume or disk group first.
After replacing a disk, you must use the Internal Storage screen's Manage link to repair the
volume.
Wait for the repair process to complete before you replace another disk.
NAS Series User's Guide
45