Tcp/Ip Screens; Configure General Tcp/Ip Settings - ZyXEL Communications NAS326-2T User Manual

8.4 TCP/IP Screens

Use the TCP/IP screens to have the NAS use a dynamic or static IP address, to configure its subnet mask,
default gateway, PPPoE and DNS servers, and to test the network connection.

8.4.1 Configure General TCP/IP Settings

Click Control Panel > Network > TCP/IP > General Settings in the navigation panel to open the following
screen. This screen allows you to configure the default gateway and DNS server.
Note: If you change the NAS's IP address, you need to log in again after you apply changes.
Figure 99 Control Panel > Network > TCP/IP > General Settings
The following table describes the labels in this screen
Table 74 Control Panel > Network > TCP/IP > General Settings
LABEL
Default Gateway
DNS Server
Automatically
Manually
Primary DNS
Server
Secondary DNS
Server
Chapter 8 Control Panel: Network
DESCRIPTION
Select the LAN interface to use as the default gateway.
DNS (Domain Name System) is for mapping a domain name to its corresponding IP address
and vice versa. If you have the IP address(es) of the DNS server(s), enter them.
Select the option to have the NAS get a DNS server address automatically.
Select this option to choose a static DNS server address. Type the DNS server IP address(es)
into the fields below.
Type a primary DNS server IP address.
Type a secondary DNS server IP address.
NAS Series User's Guide
130