Cisco 3.3 User Manual page 725

Appendix D CSUtil Database Utility
To create a CiscoSecure user database, follow these steps:
If you have not performed a backup or dump of the CiscoSecure user database, do
Step 1
so now before proceeding. For more information about backing up the database,
see
information about performing a dump of the database, see
Cisco Secure ACS Database Dump File, page
On the computer running Cisco Secure ACS, open an MS DOS command prompt
Step 2
and change directories to the directory containing CSUtil.exe. For more
information about the location of CSUtil.exe, see
Related Files, page
If the CSAuth service is running, type:
Step 3
net stop csauth
and press Enter.
The CSAuth service stops.
Type:
Step 4
CSUtil.exe -n
and press Enter.
CSUtil.exe displays a confirmation prompt.
To confirm that you want to initialize the CiscoSecure user database, type Y and
Step 5
press Enter.
The CiscoSecure user database is initialized. This process may take a few
minutes.
To resume user authentication, type:
Step 6
net start csauth
and press Enter.
78-16592-01
Backing Up Cisco Secure ACS with CSUtil.exe, page
D-2.
User Guide for Cisco Secure ACS for Windows Server
Creating a CiscoSecure User Database
D-6. For more
Creating a
D-10.
Location of CSUtil.exe and
D-9