Rear Panel - Kenwood PR-A Series Instruction Manual

5-2, Rear panel

®MASTER/SLAVE switch
Used during "one-contro 1" p a r a l l e l o p e r a t i o n i n the m a s t e r / s l a v e
configuration.
(For details, see section 6-3; "Parallel Operation.")
(©IN/OUT terminals for parallei operation
Control terminals for use in the "one-control" parallei operation mode.
©Power cable
Approx. 2 meter-long power cable, equipped with standard wall plug.
©Heat sink
A heat dissipator for the transistors, be careful as this area can beco*™
quite hot during operation.
10
During normal operation, the switch should be set to MASTER.