Specifications - Kenwood PR-A Series Instruction Manual

3. SPECIFICATIONS

I t e m
Output voltage (continuosly variable, coarse
and fine adusts)
Output current (continuosly variable)
Constant voltage characteristics
Input fluctuation (for surge of AC±10%)
Load fluctuation (for surge of 0 to 1001)
Ripple noise, rms (10Hz to 1MHz)
Ripple peak (peak-to-peak)
Transient response (Output current 5% to 100%)
Tenperature coefficient
Constant current characteristics
Input fluctuation (for surge of AC±10%)
Load fluctuation (for surge of 0 to 100%)
Ripple noise, rms (10Hz, to 1MHz)
Ripple peak (peak-to-peak)
Tenperature coefficient
1nstrumentation
Voltmeter (2.5-level-F.S.)
Ammeter (2.5-level-F.S.)
Constant-voltage operation indicator
Constant-current operation indicator
PR18-1.2A PR18 3A
0 to 18V
0 to 1.2A 0 to 3A
0,01%+2mV (3.8mV)
0.01%±2mV (3,8mV)
[Note. 1]
[Note. 1]
10mA
10mA
[Note. 1] 2 . 4 m A rms 6.0mA rms
[Note. 1] 3.6mA p-p 12mA p-p
"
18V
1.2A 3A
PR18-5A PR36-L 2A
0 to 36V
0 to 5A 0 to 1.2A
0.01%+2mV (5.6mV)
0.015HM (4 M0 0.01%±2mV (5.6mV)
0.5mV rms
2 m V p-p
100/is Typical
150ppm/°C Typical
2 m A
15mA 15mA
10mA rms 2.4mA rms
15mA p-p 4 5mA p-p
500ppm/°C Typical
1
36V
5A
1.2A
Green CV LED goes on.
Red CC LED goes on.
PR36-3A PR70-1A
PR250-0.42A
0 to 70V 0 to 250V
0 to 3A 0 to 1A
0 to 0.42A
0.01%+2mV (9mV) 0.015K+M (27mV)
0.01%+2mV (9mV) 0.01JS+M (27mV)
lmV rms 2.5mV rms
6 m V p-p
15mA
6.0mA rms
2.0mA rms
12mA p-p
6.0mA p-p
70V
3A
1A 0.42A
10mA
250V
5