Table of Contents
Advertisement
BBQ ASSEMBLY
STEP 7 – Assembling the base
• Remove the bolts and washers already installed in the front leg
(21) and the back legs (22) using a Phillips head screwdriver.
• Ensuring to align the front leg (21) with the bowl handle (14),
attach the front leg (21) to the bowl (13), by placing the top of the
leg through the leg support (16). Inside the bowl (13), align the
provided washer over the hole, and screw the provided bolt back
into the leg using a Phillips head screwdriver until it is secure.
• Follow the same process for the back legs (22).
• NOTE: The legs have holes at the bottom in order to attach the
shelf; these must be aligned in the positions shown in the diagram
below when attaching the legs to the bowl.
• Hook the bar at the front of the shelf (25) into the front leg (21),as
shown in the diagram below. Then hook the other 2 ends of the
shelf (25) into the holes in the back legs (22).
• On the outside of one back leg (22), place 1 "G" washer, followed
by 1 wheel (23). Then attach 1 "I" nut; tighten and secure with a
wrench. Then attach 1 wheel cap (24). Repeat this process for the
other back leg (22).
24
ZCKTBBQ22-C
13
21
G
I
16
22
25
23
14
24
23
I
G
G
I
2 PCS
2 PCS
Advertisement
Table of Contents
