Restore Default Button Action; About Status Bar Icons; View And Manage Notifications - Honeywell ScanPal EDA56 User Manual

Restore Default Button Action

To restore the button default action:
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings
3. Tap the clean icon
4. Choose the remapped button(s) you want restored to the default setting.
5. Tap Delete.

About Status Bar Icons

Status and notification icons show you the current status of your network, the
battery, notifications, and sounds. Use the table below to understand some of the
most common icons.
Status and Notification Icons
Icon

View and Manage Notifications

You can view recent events on the computer, manage system notifications, change
a setting, or quickly respond to an app notification by opening the notifications
panel.
24
> Honeywell Settings > Key Remap.
• Tap the check box next to the button.
OR
• Tap All Select to choose all the buttons.
Description
Pending alarm and Alarm is set.
Bluetooth is turned on.
New email.
Computer is connected to a PC with a
USB cable.
Synchronizing data.
Error with sync or sign-in.
.
Icon Description
Vibrate mode is turned on.
Airplane mode is turned on.
SD card is full.
Wi-Fi network connected with full signal
strength.
Wi-Fi network connected but no signal
strength.
Computer is connected with Ethernet.
EDA56 User Guide