Cisco SOHO Series Regulatory Compliance And Safety Information Manual page 2

Safety
•
Agency Approvals and Standards
The following safety standards apply to the Cisco 800 series routers and to the Cisco SOHO series
routers:
•
•
•
•
•
•
•
Operating Conditions for Canada
In addition to the warnings and safety guidelines listed in the
page
The Industry Canada label identifies certified equipment. This certification means that the equipment
meets certain telecommunications network protective, operational, and safety requirements as
prescribed in the appropriate Terminal Equipment Technical Requirements documents. The Department
does not guarantee the equipment will operate to the user's satisfaction.
Before installing the equipment, users should ensure that it is permissible to be connected to the facilities
of the local telecommunications company. The equipment must also be installed using an acceptable
method of connection. The customer should be aware that compliance with the above conditions may
not prevent degradation of service in some situations.
Repairs to certified equipment should be coordinated by a representative designated by the supplier. Any
repairs or alterations made by the user to this equipment, or equipment malfunctions may give the
telecommunications company cause to request the user to disconnect the equipment.
Users should ensure for their own protection that the electrical ground connections of the power utility,
telephone lines and internal metallic water pipe system, if present, are connected together. This
precaution may be particularly important in rural areas.
Users should not attempt to make such connections themselves, but should contact the appropriate
Caution
electric inspection authority, or electrician, as appropriate.
Operating Conditions for the European Community
The warnings and safety guidelines listed in the
to routers used in the European Community.
Regulatory Compliance and Safety Information for Cisco 800 Series and SOHO Series Routers
2
Power Cable and AC Adapter
UL 60950-1
CSA 60950-1
EN 60950-1
IEC 60950-1
AS/NZS 60950
CCC
NOM-019
17, the following operating condition applies to routers used in Canada:
"Translated Safety Warnings" section on
"Translated Safety Warnings" section on page 17 apply
OL-10260-02