Safety Instructions - Buffalo L715 Instruction Manual

EN

Safety Instructions

• Position on a flat, stable
surface.
• A service agent/qualified
technician should carry out
installation and any repairs if
required. Do not remove any
components on this product.
• Consult Local and National
Standards to comply with the
following:
- Health and Safety at Work
Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT immerse the
appliance in water.
• DO NOT clean with jet/
pressure washers.
• DO NOT move or carry the
appliance when it is switched
on.
• DO NOT operate the
appliance without water in
the outer container.
• Keep the lid closed when not
serving.
• Suitable for indoor use only.
2
G107_L714-L715_CP851_ML_A5_v8_20220509.indb 2 G107_L714-L715_CP851_ML_A5_v8_20220509.indb 2
• Always switch off and
disconnect the power supply
to the appliance when not in
use.
• This appliance must only
be used in accordance with
these instructions and by
persons competent to do so.
• Keep all packaging away
from children. Dispose of
the packaging in accordance
to the regulations of local
authorities.
• If the power cord is
damaged, it must be
replaced by an BUFFALO
agent or a recommended
qualified technician in order
to avoid a hazard.
• Caution! Hot
surface!
• BUFFALO recommends that
this appliance should be
periodically tested (at least
annually) by a Competent
Person. Testing should
include, but not be limited
to: Visual Inspection, Polarity
Test, Earth Continuity,
Insulation Continuity and
Functional Testing.
2022/5/9 10:27 2022/5/9 10:27