Removing The Camshafts; Removing The Cylinder Head - Husqvarna FE 250 2016 Repair Manual

18 ENGINE
18.3.12
18.3.13
166

Removing the camshafts

Removing the cylinder head

309273-10
Pull out timing chain tensioner
Loosen and remove screws
inside.
-
Take off guide rail@.
-
Take off the camshaft bearing bridge.
Info
Ensure that the dowel pins remain in place.
-
Take the timing chain from the camshaft gear.
Remove the camshafts.
O
Remove nut with the washer.
8
Loosen nuts in a crisscross pattern and remove them
with the washers.
Remove the cylinder head.
fD.
C,.
Remove O-ring
O
from the outside to the
41
41