Introduction
the Model t10280 welding cart is designed to
hold a small welder, welding tools, accessories,
consumables, and a gas bottle. the sturdy cast-
ers and wheels make moving the welding equip-
ment to the job site easy and convenient.
Figure 1. Model t10280 Welding Cart.
Specifications
Weight Capacity ...................................... 110 lbs.
Maximum gas Bottle dimensions .. 7
Bottle Chain dimensions .............. 31
torch Bracket dimensions . 3
overall dimensions .. 27
Weight .......................................................31 lbs.
WARNING: NO pORTION OF THIS MANUAL MAy bE REpRODUCED IN ANy SHApE
OR FORM WITHOUT THE WRITTEN AppROvAL OF GRIzzLy INDUSTRIAL, INC.
⁄
"d x 26"h
3
8
⁄
"l x
⁄
1
3
2
16
⁄
"h x 1
⁄
"W x 2"d
1
1
8
4
⁄
"l x 15
⁄
"W x 28
⁄
3
7
3
16
8
Copyright © AUgUSt, 2010 By grizzly indUStriAl, inC.
#tS13117 printed in ChinA
MODEL T10280
WELDING CART
Inventory
refer to the parts diagram and list on page 3 to
inventory the contents of the shipping container.
if any nonproprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
To reduce the risk of serious personal injury
when using this welding cart:
•
Do not allow children to play with or
near the cart.
•
Do not exceed the cart weight capacity
of 110 lbs.
•
Make sure the gas bottle is firmly secured
to the cart before attempting to use it or
move the cart.
•
Inspect the cart for worn or damaged
parts before using.
•
Do not use the cart as a ground for the
welder.
•
Always read, understand, and follow the
safety instructions included in the weld-
ers owner's manual.
•
Use this cart only for the designed
"d
purpose. Do not modify the cart in any
way.
"h
8
3-SHELF
INSTRUCTIONS