Table of Contents
Advertisement
Fitting a wheel
After changing a wheel
When using the "space-saver" spare
wheel, do not exceed a speed of
50 mph (80 km/h).
Have the tightening of the bolts and the
pressure of the spare wheel checked
by a CITROËN dealer or a qualified
workshop without delay.
Have the punctured wheel repaired and
replace it on the vehicle as soon as
possible.
Fitting snow tyres
If you equip your vehicle with snow
tyres fitted on steel wheel rims, special
bolts available from your CITROËN
dealer or a qualified workshop must
be used.
If the replacement of a tyre is
necessary on 4-wheel drive versions,
it is recommended that all four tyres be
replaced at the same time, ensuring
that the same make, model and size is
used on all wheels.
This is because using tyres of different
sizes, structure or rate of wear could
damage transmission components.
Practical information
List of operations
Put the wheel in place on the hub.
Screw in the bolts fully by hand.
Pre-tighten the security bolt using the
wheelbrace 1 fitted with the security
socket 5 (if your vehicle is equipped with
security wheel bolts).
Pre-tighten the other bolts using the
wheelbrace 1 only.
7
185
Advertisement
Table of Contents
