Table of Contents
Advertisement
Manual controls
Windscreen wipers
A. wiping speed selection stalk:
single wipe.
park.
intermittent (the speed can be set
manually).
or
automatic rain sensitive wipers
(the speed can be set manually).
slow.
fast.
B. intermittent operation or rain sensor
sensitivity adjustment ring.
You can increase or decrease:
-
the wiping frequency when the intermittent
mode is active,
-
the sensitivity of the rain sensor when the
automatic mode is active.
- "+": high sensitivity.
- "-": low sensitivity.
Windscreen wash
Pull the wiper stalk towards you. The
windscreen wash then the wipers operate for a
set time.
The headlamp wash is also activated if the
dipped beam headlamps are on .
Headlamp wash
Press the end of the lighting stalk to activate
the headlamp wash, when the dipped beam
headlamps are on.
To reduce the consumption of
screenwash fluid, the headlamp
washers only operate with the first
operation of the screenwash.
Visibility
5
141
Advertisement
Table of Contents
