Cisco CISCO2691 Installation Manual page 5

Attaching Brackets to Router Chassis
Attach the mounting brackets to the chassis in one of the following ways, using the screws provided in
the bracket kit:
•
•
•
•
Use a number 2 Phillips screwdriver to install the bracket screws.
Be sure to attach the wider bracket (marked RIGHT) to the side with the cooling fans. This provides
Note
extra clearance for cooling air.
Figure 3
Left bracket
for 23-inch rack
Figure 4
Right bracket
for 23-inch rack
78-15162-01
Front mounting (see Figure
Rear mounting (see Figure
Center mounting with front panel forward (see
Center mounting with rear panel forward (see
Bracket Installation—Front Mounting
Left (narrow) bracket
for 19-inch rack
Bracket Installation—Rear Mounting
NM -HD
V
BA NK 4
Right (wide) bracket
for 19-inch rack
Mounting Bracket Installation on Cisco 2691, Cisco 3631, and Cisco 3725 Routers
3.)
4.)
Figure
Figure
Use two screws on each side.
BA NK 3
BA NK 2
BA NK 1
BA NK 0
V0 SEE MAN
UAL BEFO
RE INST DSU
ALLA TION
EN 56K
Four screws are required on each side.
Attaching Brackets to Router Chassis
5.)
6.)
Right (wide) bracket
for 19-inch rack
SEE MAN
UAL BEFO
RE INST DSU
ALLA TION
56K
SEE MAN
UAL BEFO
RE INST
ALLA TION
Left (narrow) bracket
for 19-inch rack
Right bracket
for 23-inch rack
Left bracket
for 23-inch rack
5