Black & Decker BPW30MW Instruction Manual page 32

ENGLISH
TROUBLESHOOTING & WARRANTY
ERROR CODE
E1
E2
E3
E4
Page 32 Page 32
POSSIBLE CAUSE
It takes over 30 minutes
to fill water but cannot
achieve its preset
water level.
It takes over 10 minutes
to drain the water
but the washer is not
completely drained.
The top lid is open.
The washer runs out of
balance three times.
SOLUTIONS
Check troubleshooting (pg 32) for
washer not filling properly and
water leakage.
Check troubleshooting for Washer
will not drain water.
Close the lid and press the
ON/OFF button.
Redistribute the load.