Cisco 7600 Series Hardware Manual page 41

Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Product ID Power
(append "=" for spares) Required
Note
Supervisor Engine 720 supports a DFC3 on these WS-X6516-GBIC hardware revisions:
•
Lower than 5.0
–
5.5 and higher
–
Supervisor Engine 720 does not support a DFC3 on WS-X6516-GBIC hardware revisions 5.0 through 5.4. With a
•
Supervisor Engine 720 and with a DFC3 installed, WS-X6516-GBIC hardware revisions 5.0 through 5.4 do not power up.
With a Supervisor Engine 720 but without a DFC3, WS-X6516-GBIC hardware revisions 5.0 through 5.4 operate in bus
•
mode.
Refer to external field notice 24494 for more information:
•
http://www.cisco.com/warp/public/770/fn24494.shtml
WS-X6416-GBIC 2.81 A@42 V 16-port Gigabit Ethernet GBIC
WS-X6416-GE-MT 2.50 A@42 V 16-Port Gigabit Ethernet MT-RJ
WS-X6316-GE-TX 5.15 A@42 V 16-port Gigabit Ethernet RJ-45
Supervisor Engine 32 does not support WS-X6316-GE-TX.
Note
OL-10362-13
Product Description
With RSP 720-10GE
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•
Number of ports: 16
•
Number of port groups: 2
Port ranges per port group: 1–8, 9–16
With Supervisor Engine 720
With Supervisor Engine 32
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•
Number of ports: 16
•
Number of port groups: 2
Port ranges per port group: 1–8, 9–16
With Supervisor Engine 720
With Supervisor Engine 32
QoS port architecture (Rx/Tx): 1p1q4t/1p2q2t
•
• Number of ports: 16
Number of port groups: 2
Port ranges per port group: 1–8, 9–16
With Supervisor Engine 720
With Supervisor Engine 32
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
Supported Hardware
Minimum
Software Version
12.2(33)SRC
12.2(33)SRA
12.2(33)SRA
12.2(33)SRA
12.2(33)SRA
12.2(33)SRA
12.2(33)SRA
41