Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 12.2SR
Distributed Forwarding Card 3BXL
•
•
WS-F6700-DFC3BXL
Product ID
Power
(append "=" for spares)
Required
WS-F6700-DFC3BXL
3.30 A@42 V Distributed Forwarding Card 3BXL (DFC3BXL) for use on CEF720 modules
Note
•
WS-F6700-DFC3BXL uses memory that is installed on the switching module.
•
Refer to this publication for information about WS-F6700-DFC3BXL upgrades:
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_15893.html
WS-F6K-DFC3BXL
Product ID
Power
Required
(append "=" for spares)
WS-F6K-DFC3BXL
1.47 A@42 V Distributed Forwarding Card 3BXL (DFC3BXL) for use on dCEF256 and CEF256
Note
Refer to this publication for information about WS-F6K-DFC3BXL memory upgrades:
•
http://www.cisco.com/en/US/docs/switches/lan/catalyst6500/hardware/Config_Notes/78_12409.html
Supervisor Engine 720 supports a WS-F6K-DFC3BXL on these
•
Lower than 5.0
–
5.5 and higher
–
Supervisor Engine 720 does not support a DFC3 on
•
5.4. With a Supervisor Engine 720 and with a DFC3 installed,
5.0 through 5.4 do not power up.
With a Supervisor Engine 720 but without a DFC3,
•
5.4 operate in bus mode.
Refer to external field notice 24494 for more information about Supervisor Engine 720 and a DFC3 on
•
switching modules:
http://www.cisco.com/warp/public/770/fn24494.shtml
OL-10362-13
WS-F6700-DFC3BXL, page 27
WS-F6K-DFC3BXL, page 27
Product Description
Supported only with Supervisor Engine 720
Product Description
modules
Supported only with Supervisor Engine 720
Guide to Supported Hardware for Cisco 7600 Series Routers with Cisco IOS Release 15S
WS-X6516-GBIC
WS-X6516-GBIC
switching module hardware revisions 5.0 through
WS-X6516-GBIC
WS-X6516-GBIC
switching module hardware revisions 5.0 through
Supported Hardware
Minimum
Software Version
12.2(33)SRA
Minimum
Software Version
12.2(33)SRA
switching module hardware revisions:
switching module hardware revisions
WS-X6516-GBIC
27