Table of Contents
Advertisement
Guide to DV and On-Screen Display
This function helps you to easy dubbing if you have the Digital Video camcorder that has DV output jack.
You can control basic operations of the DV from the remote control of this unit such as playback, fast forward
or reverse and stop all operations if the DV camcorder is in Playback mode. Use the DV cable that has 4-pin
input jack and is compliance with the IEEE 1394 standards. When you connect to DV input jack on the front
of this unit, select "AV4" position by using [PROG.
information for the operating your DV camcorder.
1
2
Control
DV Audio
Start Rec
3
The following instructions are
described with the operations using
the remote control of this unit.
1 DV icon
2 Indicator of active device
• When the "Control" is
highlighted, press [ENTER]
to display the item selection.
Select the device you wish to
operate using [Cursor K / L],
then press [ENTER] to activate.
• Select "DVD" to control this unit.
• Select "DVC" to control your DV
camcorder.
3 Recording audio mode
• Other than the DV camcorder
is in stop mode, the "DV Audio"
can be selected. Press [ENTER]
to display the item selection
and then using [Cursor K / L]
to select the audio you wish to
output. Press [ENTER] again to
activate.
• Select "Stereo1" to dub the
stereo sound.
• Select "Stereo2" to dub the
sound with postrecording
sound.
• Select "Mix" to dub the Stereo1
and Stereo2.
4 Indicator of dubbing function
• When the unit is ready for
dubbing, "Start Rec" will
appear.
• When the unit is in dubbing,
"Pause Rec" will appear.
38
EN
Downloaded from:
http://www.usersmanualguide.com/
When the DV camcorder
is in Playback mode...
1
1
0:00:00
DVD-RW
Video mode
DVD
DV
Stereo1
AB-1234
0:00:00
SP
1:35
4
5 Channel position
6 Product name of your DV
7 Status of the current operation
Recording
DV dubbing
] and press [DISPLAY] to show the DV dubbing
/
The menu changes according
to what mode of DV Camcorder.
Switch the mode on the
DV Camcorder to Playback mode
for the dubbing information.
• When you select "AV4" by
using [PROG.
], "DV" will
/
appear.
camcorder
• If the unit cannot recognise
the input signal from the DV
camcorder or the unknown
product, "No Device" will
appear instead.
• If the unit receives the input
signal from the DV camcorder
but the unknown product,
"
" will appear instead.
****
and the time counter
• Depending on the DVC's
mechanism, the unit's counter
and icons may not be displayed
the same as DVC shows.
Each icon means:
DVC is in stop mode.
DVC is in playback.
DVC is in pause mode.
DVC is fast forwarding.
(standard speed)
DVC is fast forwarding.
(faster than above)
DVC is fast forwarding.
(faster than above)
DVC is slow forwarding.
(standard speed)
DVC is slow forwarding.
(faster than above)
DVC is slow forwarding.
(faster than above)
When the DV camcorder
is not in Playback mode...
1
1
0:00:00
DVD-RW
Video mode
DV
AB-1234
0:22:54
SP
1:35
7
DVC is fast forwarding.
(in stop mode)
DVC is fast reversing.
(in stop mode)
DVC is in reverse playback.
DVC is fast reversing.
(standard speed)
DVC is fast reversing.
(faster than above)
DVC is fast reversing.
(faster than above)
DVC is in slow reverse
playback.
DVC is in recording.
DVC is in recording
pause mode.
5
6
Advertisement
Table of Contents
