ABB XAC25849 Operation Manual page 55

Operation Manual / TPR56-F + TPR61-F
6 Removal and installation / 6.3 Installing the turbocharger
6.3.2 TPR56-F/ TPR61-F (without support)
If provided
© Copyright 2018 . All rights reserved.
Attach all gas, air, water and oil pipes in accordance with the engineb-
u
uilder's instructions.
Remove the cover from the oil connection.
u
Product
TPR56-F
TPR61-F
*) First tighten the inner screws crosswise. Then tighten the outer
screws crosswise.
Inspect the lifting gear.
u
Attach one lifting gear each to the two fins of the bearing casing
u
provided for this purpose.
Align turbocharger on bracket.
u
The fixing screws and nuts must be compliant with ISO strength class
8.8.
Fit sliding blocks (02) and tighten fixing screws (01) in accordance
u
with the specifications in the table.
Plug in the cable connector (86515) onto the speed sensor.
u
Attach all gas, air, water and oil pipes in accordance with the engineb-
u
uilder's instructions.
HZTL2499_EN
Tightening torque
*)
for fixing screws 01
135 Nm
205 Nm
Revision F December 2018