Dolphin Wireless Manager; Dolphin Wireless Manager Window - Honeywell Dolphin 7600 User Manual

Dolphin Wireless Manager

The Dolphin Wireless Manager provides a centralized interface that enables and disables all the on-board
radios. Each radio has its own configuration program and the Dolphin Wireless Manager also provides
shortcuts to the configuration utilities for each radio.
There are three radio options: 802.11b/g, GSM/GPRS, and Bluetooth.
1. 802.11b/g
If the 802.11b/g radio is installed on the terminal and there is no GSM radio installed, the
802.11b/g radio is enabled after each hard reset by default.
The WLAN radio is configured in the Honeywell WLAN Security Supplicant. The Honeywell
WLAN Security Supplicant User's Guide is available for download from the Dolphin 7600
terminal's product page at www.honeywell.com/aidc.
2. GSM/GPRS – see Working with GSM
If you have a GSM radio installed, it will be enabled after each hard reset by default.
3. Bluetooth – see Working with the Bluetooth Radio

Dolphin Wireless Manager Window

Tap Start > Settings > Connections tab > Dolphin Wireless Manager
Each rectangle represents a radio.
If a rectangle is grayed-out,
then the radio is not installed
on the terminal.
If applicable, information about
the radio appears when the
radio is activated.
7 - 6
on page 8-1.
on page 9-1.
Rev A
5/23/2008
.
These buttons show you the
state of the radio.
Dolphin® 7600 Mobile Computer
User's Guide