Cisco 3600 Series Upgrade Instructions page 16

Upgrading System Memory in Cisco 3725 Routers
Replacing the Cisco 3725 Cover
To replace the router cover, follow these steps:
Place the chassis so that the front panel faces you. Make sure that all cables are securely tucked in and
Step 1
are not in danger of being stressed or cut.
Hold the cover at a 45-degree angle, and insert the tabs into the slots along the front (bezel) edge of the
Step 2
chassis to engage the hinges. (See
Lower the front of the cover onto the chassis, making sure that the side tabs on the cover fit inside the
Step 3
chassis side panels, and the chassis tabs fit under the cover side panels. (See
Figure 5
With a number 2 Phillips screwdriver, fasten the cover with the six screws that you previously set aside.
Step 4
Reinstall the chassis on a rack or desktop.
Step 5
Proceed to the
Step 6
Upgrading System Memory in Cisco 3700 Series Routers
16
Figure 5
Replacing the Cover on a Cisco 3725 Router
"Replacing Connections to the Router" section on page
part 1.)
1
Figure 5 part 2.)
2
17.
OL-5423-02