Black & Decker BDINF20 Instruction Manual page 27

6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manuafacturer's instructions.
8. Do not place near any heat sources such as radiators,
heat registers, stoves or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarizedor
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type plug
has two blades and a third grounding prong. The wide
blade or the third prong are provided for your safety.
If the provided plug does not fit into your outlet, consult
an electrician for replacement of the obsolete outlet.
10. Protect the cord from being walked on or pinched
particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
11. Only use attachments / accessories specified by the
manufacturer.
12. Unplug unit when lightning is in the area or when unit
is not in use.
13. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
14. Do not expose to dripping or splashing.
Warnings! To reduce the risk of fire or electric
shock, do not expose this apparatus to rain or moisture.
15. Do not operate near flammable materials, fumes or
gases.
16. Do not disassemble product, no user serviceable
parts. Incorrect reassembly may result in a risk of
electric shock or fire.
17. Provide adequate ventilation and refrain from placing
items on or around the product during operation.
18. Do not incinerate the battery even if it is severely
damaged or is completely worn out. The battery can
explode in a fire. Check with local codes for possible
special disposal instructions.
19. If any leakage of liquid from the battery cells occurs,
discontinue use immediately and return the battery to
your local BLACK+DECKER Service Center or authorized
service facility.
20. Never attempt to open the battery for any reason. If
the plastic housing of the battery breaks or cracks,
immediately discontinue use and do not recharge.
21. Keep this product out of the reach of children.
22. Since the vibration produced by the inflator may cause
it to "walk", do not operate on a high shelf or other
surface. Operate at ground or bench level only.
GENERAL SAFETY RULES
f Keep work area clean. Cluttered areas and
benches invite injuries.
f Consider work area environment. Don't expose
power tools to rain.Don't use power tools in damp or
wet locations. Keep work area well lit. Do not use tool
in presence of flammable liquids, dust, or gases.
f Guard against electric shock. Prevent body contact
with grounded surfaces. For example; pipes, radiators,
ranges, and refrigerator enclosures.
f Keep children away. Do not let visitors contact tool or
extension cord.All visitors should be kept away from
work area.
f Store idle tools. When not in use,tools should be
stored in dry, and high or locked-up place — out of
reach of children.
f Don't force tool. It will do the job better and safer at
the rate for which it was intended.
f Use right tool. Don't force small tool or attachment
to do the job of a heavy-duty tool. Don't use tool for
purpose not intended.
f Dress properly. Do not wear loose clothing or
jewelry. They can be caught in moving parts. Rubber
gloves and non- skid footwear are recommended
when working outdoors. Wear protective hair covering
to contain long hair.
f Use safety glasses. Also use face or dust mask if
operation is dusty.
f Don't abuse cord. Never carry tool by cord or yank it
to disconnect from receptacle. Keep cord from heat,
oil, and sharp edges.
f Secure work. Use clamps or a vise to hold work.It's
safer than using your hand and it frees both hands to
operate tool.
f Don't overreach. Keep proper footing and balance
at all times.
f Maintain tools with care. Keep tools sharp and clean
for better and safer performance. Follow instructions
for lubricating and changing accessories. Inspect tool
cords periodically and if damaged, have repaired by
authorized service facility. Inspect extension cords
periodically and replace if damaged. Keep handles
dry, clean, and free from oil and grease.
f Disconnect or lock off tools when not in use, before
servicing, and when changing accessories, such as
blades, bits, cutters.
f Remove adjusting keys and wrenches. Form habit
of checking to see that keys and adjusting wrenches
are removed from tool before turning it on.
f Avoid unintentional starting. Don't carry tool with
finger on switch. Be sure switch is off when plugging in.
f Outdoor use extension cords. When tool is
used outdoors, use only extension cords intended for
use outdoors and so marked.
ENGLISH • 27