Cisco 2691 Installing And Formatting page 16

Internal CompactFlash Memory Card Installation and Removal
Figure 14
Hinges
Reinstalling the Cover on a Cisco Router
Before reinstalling the cover on the router, make sure that all cables are secured, and are not in danger
Caution
of being pinched or cut.
This section describes how to reinstall the router cover. You need a number 2 Phillips screwdriver or flat
blade screwdriver to complete this procedure:
Step 1 Place the chassis on a flat surface.
Step 2 Hold the cover at a 45-degree angle, and insert the tabs into the slots along the front (bezel) edge of the
chassis. (See
Center the cover over the chassis and lower it onto the chassis.
Step 3
Installing and Formatting Cisco 2691, Cisco 3631 and Cisco 3700 CompactFlash Memory Cards
16
Installing the Front Panel on a Cisco 3745 Router
1
Figure 15, Figure 16, or Figure
2
Access door
Front panel
17.)
March 2002
78-13892-03