Cisco 2600 Release Notes page 4

Routers and Interfaces Supported
Table 2 Interfaces Supported on Cisco 2600 Series Routers (continued)
Interface, Network Module, or Data Rate
Multiport T1/E1 ATM
Network Modules with
Inverse Multiplexing over
3
ATM (IMA)
Digital T1/E1 Packet Voice
Trunk Network Modules and
Multiflex Trunk WAN
Interface Cards
4 Release Notes for Cisco IOS Release 12.0(7)XK1 Feature Packs for Cisco 2600 Series Routers
1
4-port T1 ATM network module with IMA (NM-4T1-IMA[=])
4-port E1 ATM network module with IMA (NM-4E1-IMA[=])
8-port T1 ATM network module with IMA (NM-8T1-IMA[=])
8-port E1 ATM network module with IMA (NM-8E1-IMA[=])
1-port, 30-channel E1 voice/fax module, supports 30 channels of
G.729a/b, G.726, G.711 and fax or 18 channels of G.726, G.729,
G.723.1, G.728, G.729a/b, G.711, and fax. Consists of one NM-HDV,
three PVDM-12s, and one VWIC-1MFT-E1
1-port, enhanced 30-channel E1 voice/fax module, supports 30
channels of G.729a/b, G.726, G.729, G.728, G.723.1, G.711, and fax.
Consists of one NM-HDV, five PVDM-12s, and one
5
VWIC-1MFT-E1 (NM-HDV-1E1-30E[=])
2-port, 60-channel E1 voice/fax module, supports add/drop
multiplexing (drop and insert); 60 channels of G.729a/b, G.726,
G.711, and fax; or 30 channels of G726, G729, G723.1, G.728,
G.729a/b, G.711, and fax. Consists of one NM-HDV, five PVDM-12s,
and one VWIC-2MFT-E1-DI
1-port, 24-channel T1 voice/fax module, supports 24 channels of
G.729a/b, G.726, G.711 and fax or 12 channels of G.726, G.729,
G.723.1, G.728, G.729a/b, G.711, and fax. Consists of one NM-HDV,
two PVDM-12s, and one VWIC-1MFT-T1
1-port, enhanced 24-channel T1 voice/fax module, supports 24
channels of G.729a/b, G.726, G.729, G.728, G.723.1, G.711, and fax.
Consists of one NM-HDV, four PVDM-12s, and one
4
VWIC-1MFT-T1 (NM-HDV-1T1-24E[=])
2-port, 48-channel T1 voice/fax module, supports add/drop
multiplexing (drop and insert); 48 channels of G.729a/b,
G.726,G.711, and fax; or 24 channels of G726, G729, G723.1, G.728,
G729a/b, G711, and fax. Consists of one NM-HDV, four PVDM-12,
and one VWIC-2MFT-T1-DI
High-density voice/fax network module spare (NM-HDV=)
12-channel packet voice DSP module upgrade spare (PVDM-12=)
1-port RJ-48 multiflex trunk - T1 (VWIC-1MFT-T1=)
2-port RJ-48 multiflex trunk - T1 (VWIC-2MFT-T1=)
2-port RJ-48 multiflex trunk with drop and insert - T1
4
(VWIC-2MFT-T1-DI=)
1-port RJ-48 multiflex trunk - E1 (VWIC-1MFT-E1=)
2-port RJ-48 multiflex trunk - E1 (VWIC-2MFT-E1=)
2-port RJ-48 multiflex trunk with drop and insert - E1
4
(VWIC-2MFT-E1-DI=)
4
(NM-HDV-1E1-30[=])
6
(NM-HDV-2E1-60[=])
7
(NM-HDV-1T1-24[=])
4
(NM-HDV-2T1-48[=])
4
4
4
4
Routers Supported
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers