Memory Options; Routers And Interfaces Supported - Cisco 2600 Release Notes

Memory Options

Table 1 describes default memory and upgrade options for Cisco 2600 series.
Table 1
Memory Type
Flash
DRAM
DRAM DIMM
1

Routers and Interfaces Supported

The Cisco 2600 series includes the following routers:
•
Cisco 2610
•
Cisco 2611
•
Cisco 2612
•
Cisco 2613
•
Cisco 2620
•
Cisco 2621
These routers support the interfaces shown in Table 2.
Note
Part numbers followed by an equals sign identify the same products sold as spares (separately).
Table 2 Interfaces Supported on Cisco 2600 Series Routers
Interface, Network Module, or Data Rate
2
LAN Interfaces
LAN Network Modules
Serial Network Modules
Cisco 2600 Series Default Memory and Upgrade Options
Default
8 MB
1
24 MB
24 MB
Routers shipped after February 16, 2000, have 32 MB DRAM.
Part numbers without an equals sign (=) identify products installed in a router at the factory.
1
1- or 2-port Ethernet (10BaseT)
1-port Token Ring (RJ-45)
1- or 2-port Ethernet (10/100BaseT)
1-port Ethernet
4-port Ethernet
1-port ATM-25 RJ-45 interface
16- or 32-port asynchronous
4- or 8-port asynchronous/synchronous serial low speed
(128 kbps max)
Release Notes for Cisco IOS Release 12.0(7)XK1 Feature Packs for Cisco 2600 Series Routers
Upgrade Options
16 MB Flash SIMM: MEM2600-16FS=
16 MB Flash SIMM: MEM2600-8U16FS=
24 to 32 MB DRAM: MEM2600-24U32D=
24 to 48 MB DRAM: MEM2600-24U48D=
24 to 64 MB DRAM: MEM2600-24U64D=
4 MB DRAM DIMM: MEM2600-4D=
8 MB DRAM DIMM: MEM2600-8D=
16 MB DRAM DIMM: MEM2600-16D=
32 MB DRAM DIMM: MEM2600-32D=
Memory Options
Routers Supported
Cisco 2610, Cisco 2611, Cisco 2612
Cisco 2612, Cisco 2613
Cisco 2620, Cisco 2621
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
All Cisco 2600 series routers
3