Cisco 12012 Replacement Instructions Manual page 26

Removing and Replacing a Card Cage Assembly
Step 8
Step 9
Step 10
Figure 15
cable-management
Interface
cable
26 Cisco 12012 Gigabit Switch Router Card Cage Assembly Replacement Instructions
Proceeding from bottom port to the top port (line cards with multiple ports only) identify
the interface cable that connects to each line card port. Connect the interface cable to the
line card port. (Refer to Figure 15a.)
Proceeding from bottom port to the top port (line cards with multiple ports only),
carefully press the interface cable into the vertical cable bracket cable clip. (Refer to
Figure 15b.) Avoid any kinks or sharp bends in the interface cable.
Proceeding from bottom port to the top port (line cards with multiple ports only), route
the interface cable up the vertical cable bracket and carefully press the interface cable into
the rest of the cable clips. (Refer to Figure 15c.) Avoid any kinks or sharp bends in the
interface cable.
Attaching an Interface Cable to a Line Card
Chassis
tray
a
Line card
cable-management
bracket
b
Cable clip
c
Cable clips