Removing The Card Cage Assembly - Cisco 12012 Replacement Instructions Manual

Figure 13
Bolts

Removing the Card Cage Assembly

Perform the following steps to remove the card cage assembly (refer to Figure 14):
Caution
the assembly. To prevent injury, keep your back straight and lift with your legs, not your back.
Step 1
Step 2
Step 3
If you plan to return the old card cage assembly to the factory, repackage it in the shipping container
you received with the replacement card cage assembly.
Removing a System Grounding Cable
Grounding lug
An empty card cage assembly weighs 65 lb (29.5 kg). You need two people to safely lift
Loosen the six captive screws on the front edges of the card cage assembly that secure it
to the frame.
With one person positioned on each side of the frame, grasp the handle at the top of each
side of the card cage assembly and carefully slide the card cage assembly half way out of
the front of the frame.
With your free hand, grasp the handhold cutout on each side of the card cage assembly
and carefully slide the card cage assembly completely out of the front of the frame.
Cisco 12012 Gigabit Switch Router Card Cage Assembly Replacement Instructions
Removing and Replacing a Card Cage Assembly
System
grounding
receptacles
21