Operation; Clean Air; Haze - Sharp QNET FP-E50E Operation Manual

OPERATION

CLEAN AIR

START
STOP

HAZE

Releases high-density Plasmacluster
for 60 minutes, then will alternate
between Low and High level for 20
minutes each.
START
FP-E50E EN_ML_CS.indb 7
• Select the desired fan speed. (Ref. E-8)
• Unless the power cord has been unplugged, the operations
starts in the previous mode it was operated in.
10 minutes: Max High fan level
50 minutes: High fan level
20 minutes: Low fan level
20 minutes: High fan level
NOTE
• If the "Plasmacluster Ion
will be not released.
• It is possible to switch this mode to another while operating.
However, the HAZE mode will not function after switching
mode.
E-7
" is OFF, the plasmacluster ion
5/26/2557 BE 10:47 AM