Operation - Sharp FX-S120B Operation Manual

OPERATION

START/STOP
START
♪
NOTE
• When the product starts operating the operation
starts in the previous mode it was operated in.
CLEAN ION SHOWER
MODE
The product releases Plasmacluster ions with
strong airflow and collects dusts while decreasing
static electricity for 10 minutes. After that, the
Sensitive Dust Sensor sensitivity is automatically
increased and quickly detects impurities and cleans
the air powerfully for 50 minutes.
NOTE
• When the operation finishes after 60 minutes,
the product will return to the prior operation
mode. It is able to change the other modes
during this operation.
• The Plasmacluster ion cannot be turned "OFF".
STOP
♪
～
♪
EN-10
SELECT AIR VOLUME
AND MODE
♪ ♪
♪
♪
♪
♪
♪
AUTO:
The fan speed is automatically switched depending
on the amount of impurities in the air and room
brightness.
POLLEN:
The Sensitive Dust Sensor sensitivity is
automatically increased and the Sensitive Dust
Sensor quickly detects impurities such as dust and
pollen and cleans the air powerfully.
SLEEP:
The product will operate quietly, and the fan speed
will automatically be switched depending on the
amount of impurities in the air and room brightness.
When the Light Control is set to "Auto", the Display
and Cleanliness Indicator will automatically go off.
AUTO
POLLEN
SLEEP
LOW
MED
MAX