Cisco 12000 Series Installation And Configuration Manual page 47

LC-Slot3# show hardware
Cisco Internetwork Operating System Software IOS (tm) GS Software (GLC1-LC-M),
Experimental Version
12.0(20050203:211853) [samson-1g_cli_ci 144] Copyright (c) 1986-2005 by cisco Systems,
Inc.
Compiled Wed 16-Feb-05 13:17 by samson
Image text-base: 0x40010FC8, data-base: 0x41400000
ROM: System Bootstrap, Version 12.0(20030207:104405) [jkuzma-rommon 1.8] RELEASE SOFTWARE
LC-Slot3 uptime is 5 minutes
Running default software
cisco GE-4 (R7000) processor (revision 0x02) with 524289K bytes of memory.
R7000 CPU at 400Mhz, Implementation 39, Rev 3.3, 256KB L2 Cache Last reset from power-on
4 GigabitEthernet/IEEE 802.3 interface(s)
DRAM DIMM Slot 1: 256M found, Slot 2: 256M found
Configuration register is 0x0
In this example, two 256-Mbyte memory modules are installed and therefore the memory is not user
upgradable.
ATM Line Card Route Memory Options
Route memory runs the Cisco IOS software image and stores updated network routing tables
downloaded from the route processor (RP).
associated product numbers of the memory modules used for upgrading route memory on ATM line
cards.
Table 16 Route Memory Configurations for ATM Line Cards
Total Route Memory Cisco Product Number
64 MB MEM-GRP/LC-64=
128 MB MEM-DFT-GRP/LC-128
128 MB MEM-GRP/LC-128=
256 MB MEM-GRP/LC-256=
512 MB MEM-LC-ISE-512=
512 MB MEM-LC-ISE-512A=
1 GB MEM-ISE-512A-2PK=
1. This option adds a second 64-MB DIMM for a total of 128 MB for line cards that are equipped with 64 MB.
2. Standard (default) DIMM configuration for the processor on Engine 0 and Engine 2 line cards.
3. This option allows you to order a spare module or add a second 128-MB DIMM for a total of 256 MB for line cards that are already equipped
with one 128-MB DIMM.
4. Standard (default) route memory configuration for the processor on ATM ISE line cards is 512-MB.
OL-13004-01
Table 16
DIMM Module
1
1 64-MB DIMM
2
1 128-MB DIMM
3
1 128-MB DIMM
2 128-MB DIMMs
4
2 256-MB SODIMM
1 512-MB SODIMM
2 512-MB SODIMM
lists the available route memory configurations and
Route Memory DIMM Sockets
DIMM0 or DIMM1
DIMM0 or DIMM1
DIMM0 or DIMM1
DIMM0 and DIMM1
SODIMM0 and SODIMM1
SODIMM0
SODIMM0 and SODIMM1
ATM Line Card Installation and Configuration
Line Card Memory
47