Related Documentation; Product Overviews; 1-Port Oc-12C/Stm-4C Atm Line Card Overview - Cisco 12000 Series Installation And Configuration Manual

Product Overviews

Related Documentation

This publication describes the basic installation and configuration of a ATM line card. For complete
software and ATM configuration information, refer to the following publications:
•
•
•
•
•
•
•
See the
publications.
Product Overviews
This section includes product overview information for each ATM line card:
•
•
•
•
•

1-port OC-12c/STM-4c ATM Line Card Overview

The 1-port OC-12c/STM-4c ATM line card provides the Cisco 12000 series router with one 622-Mbps
ATM interface. The card interfaces to the router's switch fabric and provides one OC-12c/STM-4c
duplex SC single-mode or multimode SONET/SDH connection. This connection is concatenated, which
provides for increased efficiency by eliminating the need to partition the bandwidth.
Figure 1
Figure 1
1
2
ATM Line Card Installation and Configuration
4
Cisco 12000 Series Router Installation and Configuration Guides
Cisco 12000 Series Internet Router Configuration Guide for Cisco IOS Release 12.0S
Cisco IOS Configuration Fundamentals Configuration Guide
Cisco IOS Configuration Fundamentals Command Reference
Cisco IOS Release 12.0S Release Notes for Cisco 12000 Series Routers
4-Port ATM ISE Line Card Feature Module
Regulatory Compliance and Safety Information for Cisco 12000 Series Internet Routers
"Obtaining Documentation" section on page 62
1-port OC-12c/STM-4c ATM Line Card Overview, page 4
4-port OC-3c/STM-1 ATM Line Card Overview, page 5
4-port OC-12c/STM-4c ATM Line Card Overview, page 5
8-port OC-3c/STM-1 ATM Line Card Overview, page 6
4-port OC-12c/STM-4c ISE and 4-port OC-3c/STM-1 ISE ATM Line Card Overview, page 6
illustrates the single-mode, intermediate-range 1-port OC-12c/STM-4c ATM line card.
1-port OC-12c/STM-4c ATM Line Card-Single-Mode
1
Ejector lever
Port 0
for information on how to obtain these
3
2
3 Status LEDs
4 Display LEDs
OC-12/STM-4 SM IR ATM
4
OL-13004-01