Advertisement
2 AMP USB PORT
1. Press the Main Power Button to turn the unit ON.
2. Press and hold the USB/Light Button for 2 seconds and release to turn on the USB
Charging Port. The ring around the port will turn blue.
3. Plug in your USB Device to power or recharge.
4. To turn o
the USB port, press and hold the USB/Light Button for 2 seconds and release.
1
Note: After 1 Minute of inactivity the POWER TO GO™ will shut down to protect the internal battery.
2
Hold for
2 Seconds
and release
3
Advertisement
